Table of Contents
Advertisement
Press
Enter
detected, the values for Capacity, Cylinder, Heads, Precomp, Landing Zone, and
Sector are automatically filled in.
None
There is no HDD installed or set.
Auto
The system can auto-detect the hard disk when booting up.
Manual
When you set the channel to
you can then enter the number of cylinders, heads, Precomp, landing zone,
and sector. You can manually enter the values or you can press
display a window that tells you the min and max values.
IDE HDD Auto-Detect
SATA 1 (A0)
Access Mode
Capacity
Cylinder
Head
Precomp
Landing Zone
Sector
The BIOS supports the following HDD
Access Modes:
EVGA
32
to auto-detect SATA channels in the system. Once the channel is
CHS
For HDD less than 528 MB.
LBA
For HDD greater than 528 MB and
supporting LBA (Logical Block
Addressing).
Large
For HDD greater than 528 MB but not supporting LBA.
Auto
Recommended mode.
and change
[Manual]
[Press Enter]
[Manual}
[CHS]
0 MB
Press ENTER to display sub-
menu
.....0
t
[
0]
[
0]
Cylinder
[
0]
[
0]
Min=
Max=65535
Key in a DEC number :
:Move
to
Access Mode
[CHS]
to
Enter
b
ll
0
ENTER:Accept
ESC:Abort
,
Advertisement
Table of Contents
