Fan Connections - EVGA 730i - nForce Motherboard - ATX User Manual

Fan Connections

There are three fan connections on the motherboard. The fan speed can be
detected and viewed in the
fans are automatically turned off after the system enters S3, S4 and S5mode.
System Fan
Sense
+12V
Ground
EVGA
20
PC Health Status
Note: The CPU fan cable can be either a 3-pin or a 4-pin
connector. Connect a 3-pin connector to pins 1, 2, and 3 on the
motherboard connector.
section of the CMOS Setup. The
Sense
CPU Fan
Ground
+12V
Sense
Control
Power Fan
+12V
Ground