Palm Treo 700P Using Manual page 27

Connecting your Treo smartphone to your computer
0
1. Plug the AC charger into a wall outlet.
2. Plug the USB sync cable into an available USB port or a powered
USB hub on your computer.
3. With the sync button facing up, connect the sync cable to the
bottom of your smartphone. Do not press the sync button until
you are instructed to do so.
4. Connect the charger cable to the connector on the sync cable.
Sync
cable
You are now ready to synchronize, go to Synchronizing information—
the basics.
Using Your Treo 700 Smartphone
P
Sync button
Setting up your computer
Tip
For best performance,
plug your sync cable
directly into a USB
port on your computer.
If your computer has
USB ports on both the
front and back, we
suggest using the back
port; the front port is
often a low-power
port. If you use a USB
hub, make sure the
hub has its own power
supply.
21