When synchronization is complete, a message appears at the top of
your smartphone screen. Be patient; synchronization may take a few
minutes.
MAC ONLY
0
1.
Double-click the HotSync manager icon
2.
Click the HotSync Controls tab, and then select Enabled.
3.
Click the Connection Settings tab, and then check the On box next
to IR port.
4.
Close the HotSync Software Setup window.
5.
On your smartphone, go to Applications
HotSync
.
6.
Select Local.
7.
Select the pick list below the HotSync icon and select IR to a
PC/Handheld.
8.
Position the IR port of your smartphone within a few inches of the
IR port of your computer.
9.
Select the HotSync icon
When synchronization is complete, a message appears at the top of
your smartphone screen. Be patient; synchronization may take a few
minutes.
Using Your Treo 700
on your smartphone.
Smartphone
P
in the Palm folder.
and select
Beaming information
212