Installing The Battery - Palm Treo 700P Using Manual

Installing the battery

0
1. Use one hand to press the battery door release button and use
your other hand to slide the battery door downward to remove it
from your smartphone.
2. Align the metal contacts on the battery with the contacts inside the
battery compartment.
3. Insert the battery into the compartment at a 45-degree angle, and
then press it into place.
4. Slide the battery door onto the back of the smartphone until it
clicks into place.
5. When the language selection screen appears, select the language
you want to use.
You must select the same language on your
[ ! ] IMPORTANT
smartphone and desktop software.
6. Follow the onscreen instructions to set up your smartphone.
Using Your Treo 700
Battery door
release button
Smartphone
P
Battery
contacts
Smartphone
contacts
Notch
Installing the battery
Tip
If your smartphone
does not turn on, you
need to connect it to
the AC charger. If it still
does not turn on after
you connect the AC
charger, then do a soft
reset. See Performing
a soft reset.
Tip
You can buy an extra
battery as a spare for
long airplane trips or
periods of heavy use.
To purchase batteries
that are compatible
with your smartphone,
go to www.palm.com/
mytreo700pVerizon.
7