Overview Of Steps In Generating A Table - Texas Instruments Voyage 200 User Manual

Tables Tables Tables Tables

Overview of Steps in Generating a Table

Overview of Steps in Generating a Table
Overview of Steps in Generating a Table Overview of Steps in Generating a Table
To generate a table of values for one or more functions, use the general steps shown
below. For specific information about setting table parameters and displaying the table,
refer to the following pages.
Generating a Table Generating a Table
Generating a Table Generating a Table
1. Set mode and, if necessary,
Graph
mode (3).
Tables are not available in
Note:
mode.
2. Define functions on Y= Editor (8 #).
3. Select (†) which defined functions to
display in the table.
For information on defining and
Note:
selecting functions with the Y= Editor,
refer to Basic Function Graphing.
4. Set up the initial table parameters
(8 &).
You can specify an automatic table
Note:
that is based on initial values or that
matches a graph, or a manual (ask) table.
Tables
Angle
3D Graph
454