Texas Instruments Voyage 200 User Manual page 914

180 Break
185 Checksum error
190 Circular definition
200 Constraint expression invalid
205 Data is too big to save to a variable. Please use F6 Util to reduce the
size.
210 Data type
220 Dependent limit
225 Diff Eq setup
230 Dimension
240 Dimension mismatch
250 Divide by zero
260 Domain error
270 Duplicate variable name
280 Else and ElseIf invalid outside of If..EndIf block
290 EndTry is missing the matching Else statement
295 Excessive iteration
300 Expected 2 or 3-element list or matrix
307 Flash application extension (function or program) not found
308 Flash application not found
Appendix B: Technical Reference
The ´ key was pressed during a long calculation or during program
execution.
This message is displayed to avoid running out of memory during
infinite replacement of variable values during simplification. For
example, a+1! a, where a is an undefined variable, will cause this
error.
For example, solve(3x^2- 4=0, x) | x<0 or x>5 would produce this
error message because the constraint is separated by "or" and not
"and."
The size of the data in the editor exceeds the maximum size that can
be saved in a variable. The F6 Util menu provides operations that
can be used to reduce the size of the data.
An argument is of the wrong data type.
A limit of integration is dependent on the integration variable. For
example, ä‰(x^2,x,1,x) is not allowed.
A list or matrix index is not valid. For example, if the list {1,2,3,4} is
stored in L1, then L1[5] is a dimension error because L1 only
contains four elements.
Two or more arguments must be of the same dimension. For
example, [1,2]+[1,2,3] is a dimension mismatch because the
matrices contain a different number of elements.
An argument must be in a specified domain. For example, ans(100)
is not valid because the argument for ans() must be in the range 1–
99.
908