Sequential Simul; Real A+Bi Re^(Theta I); Full Horizontal Graph-Table - Texas Instruments TI-84 Plus CE Getting Started

DOT-THIN
Note:
• You can change individual line styles in the Y= editor.
• Setting a line style plotting mode sets all Y= line styles to the selected style.
SEQUENTIAL SIMUL
graphing-order mode evaluates and plots one function completely before
SEQUENTIAL
the next function is evaluated and plotted.
(simultaneous) graphing-order mode evaluates and plots all selected functions
SIMUL
for a single value of X and then evaluates and plots them for the next value of X.
Regardless of which graphing mode is selected, the calculator will sequentially
Note:
graph all stat plots before it graphs any functions.
i
REAL a+b
mode does not display complex results unless complex numbers are entered as
REAL
input.
Two complex modes display complex results.
• i (rectangular complex mode) displays complex numbers in the form a+b i . The
a+b
TI-84 Plus CE supports the n/d fraction template.
• (q i ) (polar complex mode) displays complex numbers in the form
re^
re^(q i ).

FULL HORIZONTAL GRAPH-TABLE

screen mode uses the entire screen to display a graph. Each split-screen mode
FULL
displays two screens simultaneously.
24 Setting Up the Calculator Modes
whose graph has an axis as an asymptote or for any
plotting where a more detailed view of the graph is needed
as compared to THICK.
DOT display is 1 pixel per dot graphed. Use DOT-THIN for
functions whose graph has an axis as an asymptote or for
any plotting where a more detailed view of the graph is
needed as compared to DOT-THICK.
re^ (theta i
)