Options that are not currently valid are dimmed. For example, ...
Note:
dimmed if you have not installed a Flash application. †
have not created a function or a program.
Selecting a Built-in Command from the CATALOG
Selecting a Built-in Command from the CATALOG
Selecting a Built-in Command from the CATALOG
Selecting a Built-in Command from the CATALOG
When you select a command, its name is inserted in the entry line at the cursor location.
Therefore, you should position the cursor as necessary before selecting the command.
1. Press:
2 ½
2. Press „
Built-in
The first time you display the
Note:
you display the list, it starts at the same place you left it.
3. Move the 8 indicator to the command, and press ¸.
To move the
8
One function or program at a time
One page at a time
Operating the Calculator
.
•
Commands are listed in alphabetical order.
Commands that do not start with a letter
(+, %,
•
To exit the
command, press
Built-in
indicator:
‡
G
,
, etc.) are at the end of the list.
CATALOG
without selecting a
N
.
list, it starts at the top of the list. The next time
Press or type:
D
C
or
2 D
2 C
or
Flash Apps
is dimmed if you
User-Defined
is
190