Dividing When Base = Hex Or Bin - Texas Instruments Voyage 200 User Manual

The mode controls the displayed format
Base
of integer results only.
The Base mode affects output only. You
Note:
must always use the
hex or binary number.
Fractional and floating-point results are
always shown in decimal form.

Dividing When Base = HEX or BIN

Dividing When Base = HEX or BIN
Dividing When Base = HEX or BIN Dividing When Base = HEX or BIN
When Base=HEX or BIN, a division result is
displayed in hexadecimal or binary form
only if the result is an integer.
To ensure that division always produces an
integer, use
intDiv( )
Number Bases
or prefix to enter a
0h 0b
instead of e.
If Base mode = HEX:
0h prefix in result
identifies the base.
If Base mode = HEX:
8 ¸
Press to
display the result in
APPROXIMATE form.
682