Change the settings on the Device Properties dialog and then click OK to save
the new settings.
All changes made to controls on any tab of
the above dialog take effect from when
Unimessage Pro, or the device, is restarted.
The All settings button allows you to
review and change all of the detailed
settings that are available for the type of
device you are using. Only make changes if
you are sure improper settings can cause
unpredictable behavior.
Restarting a device, to activate changed settings
Changes made to a device's properties only take effect from the next time you
start Unimessage Pro, or close and then restart the device after editing its
settings, as described below:
Select the device in the Devices list.
Click the Log off toolbar button:
Click the Start toolbar button:
16