Oki OF5650 User Manual page 10

10
Before you can send email messages, you must have
defined an email driver and an email account. If you
configured Unimessage Pro for use with a fax machine
during installation, you must define a new device and
account for email messages.
Additional devices can be defined by selecting Device
from the File, New menu at the PC to which the device is
connected.
You will only be permitted to have the number of devices
allowed by your license active at any one time. You
may be able to upgrade your copy of Unimessage Pro
to allow more devices to be active at the same time if
your message traffic requires it. Refer your
Unimessage Pro Administrator to the section on
Upgrading Unimessage Pro if required.
Additional email accounts can be defined by selecting
Email account from the File, New menu.
If you have installed Unimessage Pro onto a local hard
disk [HD] and want to use it from other PCs on a peer-to-
peer network remember to share the Unimessage Pro
folder with full access rights to all other PCs that you
want to be able to use Unimessage Pro.
If you are using a Windows Dial Up Networking [DUN]
connection and are also connected to a LAN using the
IPX/SPX protocol, e.g. some versions of Novell Netware,
you will be disconnected from the LAN while the
Windows DUN connection is established. To avoid this
display the properties for the Windows DUN, click the
Server Types tab and de-select the Log on to network
and IPX/SPX Compatible options then click OK.