Setting The Smart Cover Sensor Protection Level - HP DC7600 - Management Manual

Desktop Management Guide
Smart Cover Sensor Protection Levels
Level Setting
Level 0 Disabled
Level 1 Notify User
Level 2 Setup Password
✎
These settings can be changed using Computer Setup. For more information about Computer
Setup, see the Computer Setup (F10) Utility Guide on the Documentation and Diagnostics CD.

Setting the Smart Cover Sensor Protection Level

✎
36
Description
Smart Cover Sensor is disabled (default).
When the computer is restarted, the screen
displays a message indicating that the computer
cover or side panel has been removed.
When the computer is restarted, the screen
displays a message indicating that the computer
cover or side panel has been removed. You must
enter the setup password to continue.
To set the Smart Cover Sensor protection level, complete the
following steps:
1. Turn on or restart the computer. If you are in Windows, click
Start > Shut Down > Restart.
2. As soon as the computer is turned on, press
monitor light turns green to enter Computer Setup. Press
bypass the title screen, if necessary.
F10
If you do not press
computer and again press
access the utility.
3. Select Security > Smart Cover > Cover Removal Sensor, and
select the desired security level.
4. Before exiting, click File > Save Changes and Exit.
www.hp.com
at the appropriate time, you must restart the
F10
when the monitor light turns green to
Desktop Management Guide
F10
when the
Enter
to