HP DC7600 - Management Manual page 29

Security Features Overview
Option
Setup Password
Power-On Password
Password Options
(This selection will appear
only if a power-on password
is set.)
Pre-Boot Authorization
Smart Cover
✎
For more information about Computer Setup, see the Computer Setup (F10) Utility Guide on the
Documentation and Diagnostics CD.
Support for security features may vary depending on the specific computer configuration.
Desktop Management Guide
The following table and sections refer to managing security features
of the computer locally through the Computer Setup (F10) Utilities.
Allows you to set and enable setup (administrator) password.
✎
If the setup password is set, it is required to change
Computer Setup options, flash the ROM, and make
changes to certain plug and play settings under Windows.
See the Troubleshooting Guide on the Documentation and
Diagnostics CD for more information.
Allows you to set and enable power-on password.
See the Troubleshooting Guide on the Documentation and
Diagnostics CD for more information.
Allows you to specify whether the password is required for
warm boot (CTRL+ALT+DEL).
See the Computer Setup (F10) Utility Guide on the
Documentation and Diagnostics CD for more information.
Allows you to enable/disable the Smart Card to be used in
place of the Power-On Password.
Allows you to:
• Enable/disable the Cover Lock.
• Enable/disable the Cover Removal Sensor.
✎
Notify User alerts the user that the sensor has detected that
the cover has been removed. Setup Password requires that
the setup password be entered to boot the computer if the
sensor detects that the cover has been removed.
This feature is supported on some models only. See the
Computer Setup (F10) Utility Guide on the Documentation
and Diagnostics CD for more information.
www.hp.com
Desktop Management Guide
Description
25