Deleting A Power-On Or Setup Password - HP DC7600 - Management Manual

Desktop Management Guide

Deleting a Power-On or Setup Password

✎
✎
32
If the system is equipped with an embedded security device, refer to
the HP ProtectTools Security Manager Guide at
1. Turn on or restart the computer. If you are in Windows, click
Start > Shut Down > Restart the Computer.
2. To delete the Power-On password, go to step 3.
To delete the Setup password, as soon as the computer is turned
F10
on, press when the monitor light turns green to enter
Computer Setup. Press
necessary.
F10
If you do not press
computer and again press
access the utility.
3. When the key icon appears, type the current password followed
by a slash (/) or alternate delimiter character as shown:
current password/
Enter
4. Press .
Refer to "National Keyboard Delimiter Characters"
about the alternate delimiter characters. The power-on password and
setup password may also be changed using the Security options in
Computer Setup.
www.hp.com
Enter
to bypass the title screen, if
at the appropriate time, you must restart the
F10
when the monitor light turns green to
Desktop Management Guide
www.hp.com
.
for information