Dell PowerEdge T410 Hardware Owner's Manual page 32

Dell server hardware owner's manual
Hide thumbs Also See for PowerEdge T410:
Table of Contents

Advertisement

Table 1-2. LCD Status Messages (continued)
Code
Text
E1420
CPU Bus parity
error. Power
cycle AC.
E1422
CPU # machine
check error.
Power cycle
AC.
E1610
Power Supply #
(### W)
missing. Check
power supply.
E1614
Power Supply #
(### W) error.
Check power
supply.
E1618
Predictive
failure on
Power Supply #
(### W). Check
PSU.
E161C
Power Supply #
(### W) lost
AC power.
Check PSU
cables.
32
About Your System
Causes
The system BIOS has
reported a processor bus
parity error.
The system BIOS has
reported a machine check
error.
Specified power supply
was removed or is missing
from the system.
Specified power supply
has failed.
An over-temperature
condition or power supply
communication error has
caused the predictive
warning of an impending
power supply failure.
Specified power supply is
attached to the system,
but it has lost its AC
input.
Corrective Actions
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Getting Help" on
page 185.
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Getting Help" on
page 185.
See "Troubleshooting
Power Supplies" on
page 161.
See "Troubleshooting
Power Supplies" on
page 161.
See "Troubleshooting
Power Supplies" on
page 161.
Check the AC power
source for the specified
power supply. If the
problem persists, see
"Troubleshooting Power
Supplies" on page 161.

Advertisement

Table of Contents
loading

Table of Contents