Dell PowerEdge T410 Hardware Owner's Manual page 13

Item Indicator, Button, or
Connector
3 NMI button
4 Power-on indicator,
power button
5 System identification
button
6 LCD menu buttons
Icon Description
Used to troubleshoot software and
device driver errors when using certain
operating systems. This button can be
pressed using the end of a paper clip.
Use this button only if directed to do so
by qualified support personnel or by the
operating system's documentation.
The power-on indicator lights when the
system power is on.
The power button controls the DC
power supply output to the system.
NOTE:
video monitor can take up to 25 seconds
to display an image, depending on the
amount of memory installed in the system.
NOTE:
systems, turning off the system using the
power button causes the system to
perform a graceful shutdown before
power to the system is turned off.
NOTE:
press and hold the power button for five
seconds.
The identification button on the front
panel can be used to locate a particular
system. When the button is pushed, the
LCD panel on the front flashes blue
until the button is pushed again.
Allows you to navigate the control panel
LCD menu.
When powering on the system, the
On ACPI-compliant operating
To force an ungraceful shutdown,
About Your System
13