Sata Settings Screen - Dell POWEREDGE E11S Owner's Manual

Option
Processor Family-Model-
Stepping
Level 2 Cache
Level 3 Cache
Number of Cores
Logical Processor
(Enabled default)
Virtualization Technology
(Disabled default)
Execute Disable
(Enabled default)
Number of Cores per
Processor
(All default)
Turbo Mode
(Enabled default)
C States
(Enabled default)

SATA Settings Screen

Option
Embedded SATA
(AHCI default)
Port A
(Auto default)
Port B
(Off default)
28
Using the System Setup Program and Boot Manager
Description
Displays the processor family and model.
Displays the level 2 cache size.
Displays the level 3 cache size.
Displays the number of cores of the processor.
On processors that support Simultaneous Multi-
Threading (SMT) technology, each processor core
supports up to two logical processors. If this field is set to
Enabled, the BIOS reports both logical processors. If set
to Disabled, only one logical processor is monitored by
the BIOS.
Enabled permits virtualization software to use the
virtualization technology incorporated in the processor.
NOTE:
Disable this feature if your system will not be
running virtualization software.
Enables or disables Execute Disable Memory Protection
Technology.
If set to All, the maximum number of cores in each
processor is enabled.
If Turbo Boost technology is supported by the processor,
enables or disables Turbo Mode.
When set to Enabled, the processor can operate in all
available power states.
Description
Allows the embedded SATA to be set to Off, ATA, AHCI,
or RAID modes.
Auto enables BIOS support for the device attached to
SATA port A. Off disables BIOS support for the device.
Auto enables BIOS support for the device attached to
SATA port B. Off disables BIOS support for the device.