Installing A 2.5-Inch Hard Drive (When Available) - Dell POWEREDGE E11S Owner's Manual

Figure 3-13. Removing and Installing a 2.5-Inch Hard Drive
3
1 hard drive
3 hard-drive bracket
6 Slide the hard-drive carrier back in the hard drive bay.
7 Connect the power/data cable(s) to the hard drive(s).
8 Close the system. See "Closing the System" on page 46.

Installing a 2.5-Inch Hard Drive (When Available)

CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1 Turn off the system and attached peripherals, and disconnect the system
from the electrical outlet.
2 Open the system. See "Opening the System" on page 45.
2 screws (4)
Installing System Components
1
2
63