Figure 3-25. Removing and Installing the Link Bracket Lock
1
screw
6 Remove the mounting screw holding the control panel assembly to the
chassis. See Figure 3-26.
7 Move the control panel assembly toward the back of the system and lift it
out of the system.
CAUTION:
the cable.
8 To disconnect the control panel cable from the control panel assembly,
press the metal tabs on the ends of the cable connector and gently work
the connector out of the socket.
92
Installing System Components
Do not pull on the cable to unseat the connector. Doing so can damage
2
link bracket lock
1
2