Installing An Emi Filler Panel - Dell POWEREDGE E11S Owner's Manual

Figure 3-5. Removing and Installing the EMI Filler Panel
2
1
1 tab
3 shoulder screws (2)

Installing an EMI Filler Panel

CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1 Align the screws on the EMI filler panel with the slots in the chassis and
slide the EMI filler panel into the bay until it clicks into place. See
Figure 3-5.
2 Replace the front bezel. See "Installing the Front Bezel" on page 48.
3 Close the system. See "Closing the System" on page 46.
3
2 EMI filler panel
4 drive release latch
Installing System Components
4
51