Sata Settings Screen - Dell PowerEdge T630 Owner's Manual

Menu Item
Dell Controlled Turbo
Number of Cores per
Processor
Processor 64-bit Support
Processor Core Speed
Processor 1
Family-Model-Stepping
Brand
Level 2 Cache
Level 3 Cache
Number of Cores

SATA Settings screen

You can use the SATA Settings screen to view the SATA settings of SATA devices and enable RAID on
your system.
To view the SATA Settings screen, click System Setup Main Menu → System BIOS → SATA Settings.
Menu Item
Embedded SATA
Security Freeze Lock
Write Cache
Port A
Model
Drive Type
Capacity
32
Description
NOTE: Depending on the number of installed CPUs, there may be
up to four processor listings.
Controls the turbo engagement. Enable this option only when System
Profile is set to Performance.
Controls the number of enabled cores in each processor. By default, the
Number of Cores per Processor option is set to All.
Specifies if the processor(s) support 64-bit extensions.
Displays the maximum core frequency of the processor.
NOTE: Depending on the number of installed CPUs, there may be
up to four processor listings. The following settings are displayed for
each processor installed in the system.
Displays the family, model and stepping of the processor as defined by
Intel.
Displays the brand name reported by the processor.
Displays the total L2 cache.
Displays the total L3 cache.
Displays the number of cores per processor.
Description
Enables the embedded SATA to be set to Off, ATA, AHCI, or RAID modes.
By default, the Embedded SATA option is set to AHCI.
Sends Security Freeze Lock command to the Embedded SATA drives
during POST. This option is applicable only to ATA and AHCI modes.
Enables or disables the command for Embedded SATA drives during
POST.
Sets the drive type of the selected device. For Embedded SATA settings
in ATA mode, set this field to Auto to enable BIOS support. Set it to OFF
to turn off BIOS support.
For AHCI mode or RAID mode, BIOS always enables support.
Displays the drive model of the selected device.
Displays the type of drive attached to the SATA port.
Displays the total capacity of the hard drive. The field is undefined for
removable media devices such as optical drives.