Uniden DECT1480-2 User Manual page 6

Base keys/LEDs and how they work
Key (icon) What it does
-
In standby: increase the ringer volume.
+
Up ( )
-
While a message is playing: increase the speaker volume.
-
In standby: decrease the ringer volume.
–
down ( )
-
While a message is playing: decrease the speaker volume.
-
While a message is playing: skip to the next message.
Fwd ( )
-
While playing messages: for the first 2 seconds, go to
the previous message; after that: go to the start of the
REV ( )
current message.
-
In standby: start playing messages.
play/sTop
-
While a message is playing: stop playing messages.
( )
-
If the phone is ringing: mute the ringer for this call only.
-
In standby: turn the answering system on or off.
on / oFF
-
While a message is playing: delete this message.
dElETE
-
In standby: delete all messages.
( )
-
In standby: page all handsets.
Find
LED What it means
-
On: a message is playing.
play/sTop
-
Blinking: there are new messages.
-
On: the answering machine is on.
-
Off: the answering machine is off.
sTaTUs
-
Blinking: the base is paging all handsets.
Handset keys/LEDs and how they work
Key (icon)
ClEaR/
inTERCom

Talk/Flash
What it does
-
In standby: start an intercom call.
-
During a call: put the call on hold and start a call
transfer to another handset.
-
While entering text: delete one character, or press
and hold to delete all the characters.
-
In standby: start a telephone call (get a dial tone).
-
During a call: switch to a waiting call.