If you need the phone to pause before sending the next set of digits,
press
in the display.
REdial/paUsE
You can insert as many pauses as you need, but each pause counts
P
as one of your 20 digits.
With the phone in standby, open the phonebook and find the entry
Phonebook Entry Options
you want. Press
menu. The phone prompts you to edit or delete the entry.
With the phone in standby, press
Finding a Lost Handset
beep in a -beep pattern for 1 minute or until you press
You can also end the page by pressing any key from the found handset.
USING SPECIAL FEATURES
If you often have to enter a series of digits or a code number during a
Chain Dialing
call, you can save that code number to a phonebook entry and use the
phonebook to send the code number.
1.
Enter the code number (up to 20 digits) into the phonebook just
like a regular phonebook entry. Be sure to enter the code number
into the phonebook exactly as you would enter it during a call.
2.
When you hear the prompt that tells you to enter the number,
open the phonebook and find the entry that contains your code
number. Press
transmits the code number entered in the previous step. If you
change your mind, use
Multihandset Features
When an outside call comes in, two handsets can join in a conference
Conference Calling
call with the outside caller.
to insert a 2-second pause. The pause shows as a
to open the individual phonebook entry
mEnU/sElECT
mEnU/sElECT
phonEbook/lEFT
on the base. All the handsets will
Find
to transmit the code. The phone
to close the phonebook.
again.
Find
1