Ac Adapter And Battery Information - Uniden DECT1480-2 User Manual

Plug the DSL filter into the telephone wall jack and plug your phone's
base into the filter. Make a test call to make sure the noise is gone.
Moisture and liquid can damage your cordless phone.
Liquid Damage
If the exterior housing of the handset or base is exposed to moisture
or liquid, wipe off the liquid, and use as normal.

If moisture or liquid is inside the plastic housing (i.e. liquid can
be heard in the phone or liquid has entered the handset battery
compartment or vent openings on the base), follow these steps:

Handset
1. Remove the battery cover and disconnect
the battery.
2. Let dry for at least 3 days with the battery
disconnected and the cover off.
3. After the handset dries, reconnect the
battery and replace the cover. Recharge the
battery fully (15-20 hours) before using.
CAUTION! DO NOT use a microwave oven to speed up the
drying process. This will cause permanent damage to the
handset, base and the microwave oven.

AC Adapter and Battery Information

• Use only the supplied AC adapters. Be sure to use the proper adapter for the
base & any chargers.
• Do not place the power cord where it creates a trip hazard or where it could
become chafed and create a
fire or electrical hazard.
• Do not place the unit in direct
sunlight or subject it to high
temperatures.
• Fully charged, the battery
should provide about 10
hours of talk time and about 7
Part number Part number
AC AC
adapter adapter
Input voltage Input voltage
Output voltage 8V AC @ 300mA Output voltage 8V AC @ 300mA
Part number Part number
Battery Battery
pack pack
Capacity Capacity
Base
1. Disconnect the AC
adapter to cut off
the power.
2. Disconnect the
telephone cord.
3. Let dry for at least
3 days before
reconnecting.
Base/Charger Base/Charger
PS-0035 PS-0035
120V AC, 60 Hz 120V AC, 60 Hz
BT-1007 BT-1007
500mAh, 2.4V DC 500mAh, 2.4V DC
2