Uniden DECT1480-2 User Manual page 25

used in this equipment is provided
(i.e., RJ11C) in the packaging with each
piece of approved terminal equipment.
A plug and jack used to connect this
equipment to the premises wiring and
telephone network must comply with
the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A
compliant telephone cord and modular
plug is provided with this product. It is
designed to be connected to a compat-
ible modular jack that is also compliant.
See installation instructions for details.
The REN is used to determine the
number of devices that may be con-
nected to a phone line. Excessive RENs
on a phone line may result in devices
not ringing in response to an incoming
call. In most but not all areas, the sum
of RENs should not exceed five (5.0).
To be certain of the number of devices
that may be connected to a line, as
determined by the total RENs, contact
the telephone provider. The REN for
this product is part of the product
identifier that has the format US:
AAAEQ##TXXXX. The digits represented
by ## are the REN without a decimal
point (e.g., 03 is a REN of 0.3).
If this equipment causes harm to the
telephone network, the telephone
company will notify you in advance
that temporary discontinuance of ser-
vice may be required. But if advance
notice isn't practical, the telephone
company will notify the customer as
soon as possible. Also, you will be
advised of your right to file a com-
plaint with the FCC if you believe it is
necessary. The telephone company
may make changes in its facilities,
equipment, operations or procedures
that could affect the operation of
the equipment. If this happens the
telephone company will provide ad-
vance notice in order for you to make
necessary modifications to maintain
uninterrupted service.
Please follow instructions for repair-
ing, if any (e.g. battery replacement
section); otherwise do not substitute
or repair any parts of the device
except as specified in this manual.
Connection to party line service is
subject to state tariffs. Contact the
state public utility commission, public
service commission or corporation
commission for information. This
equipment is hearing aid compatible.
If you experience trouble with this
equipment, contact the manufacturer
(see the cover of this manual for
contact information) or an authorized
agent. If the equipment is causing
harm to the telephone network, the
telephone company may request that
you disconnect the equipment until
the problem is resolved.
If your home has wired alarm equip-
ment connected to a phone line, be
sure that installing the system does
not disable your alarm equipment. If
you have questions about what will
disable alarm equipment, contact your
telephone company or a qualified
installer.
Any changes or modifications to this
product not expressly approved by the
manufacturer or other party responsible