Using The System While You're Away From Home - Uniden DECT1480-2 User Manual

To...
answer the call
mute the call screen
without answering*
* If you mute the call screen, the system continues taking the message: it just
stops playing through the speaker.
You can also use your answering system from any touch-tone phone.

Using the System while You're Away from Home

Before you can use this feature, you must program a security code.
1. With the phone in standby, open the menu from any handset.
Programming a security code
2. Select Ans. Setup, then select Security Code.
. Use the number keypad to enter a two-digit security code (01 to
99). Press

Remember to make a note of your new security code!
1. Call your telephone number and wait for the system to answer.
Dialing In to Your System
(If your answering system is off, it will answer after ten rings and
sound a series of beeps instead of your greeting.)
2. During the greeting or beeps, press
security code. If you enter it incorrectly  times, the system hangs
up and returns to standby.
. The system announces the current time, the number of messages
stored in memory, and a help prompt. It will beep intermittently to
let you know it's waiting for your command.
4. When you
hear beeping,
enter a 2-digit
command from
this chart:
From the base
NA
Press
when you're finished.
mEnU/sElECT
01 Repeat message 01 Repeat message
02 Play message 02 Play message
03 Skip message 03 Skip message
04 Delete message 04 Delete message
.
play/sTop
and immediately enter your
0
From a handset
Press
Talk/Flash
Press or return the
End
handset to the cradle.
05 Stop playback 05 Stop playback
06 Turn the system on 06 Turn the system on
09 Turn the system off 09 Turn the system off
10 Hear help prompts 10 Hear help prompts
.
1