Dell PRECISION 610 User Manual page 98

8-2 Dell Precision 610 Mini Tower Systems User's Guide
To verify that all power has been removed from the system, make sure that the
standby light-emitting diode (LED) on the system board has gone out. For the
location of this LED, see Figure 9-1.
While you work, periodically touch an unpainted metal surface on the computer
chassis to dissipate any static electricity that might harm internal components.
Also avoid touching components or contacts on a card and avoid touching pins on
a chip.
In addition, Dell recommends that you periodically review the safety instructions at
the front of this guide.
When you remove an option from its shipping carton, you may find it wrapped in anti-
static packing material designed to protect it from electrostatic damage. Do not
remove the packing material until you are ready to install the option.
Use the following procedure to remove the computer cover:
RI <RXU (TXLSPHQW
:DUQLQJ IRU <RXU 3HUVRQDO 6DIHW\ DQG 3URWHFWLRQ