Dell PRECISION 610 User Manual page 129

DC power
cable
EIDE cable for
tape drive
)LJXUH   $WWDFKLQJ (,'( 7DSH 'ULYH &DEOHV
If your system came with an EIDE CD-ROM or tape drive, use the spare connec-
tor on the existing interface cable. Otherwise, use the EIDE or SCSI cable
provided in the drive kit.
For a SCSI drive, connect the cable from the drive to the interface connector
labeled "SCSI_NARROW" on the system board.
For a diskette drive, connect the cable from the drive to the interface connector
labeled "DISKETTE" on the system board.
For a drive that comes with its own controller card, connect the other end of the
interface cable to the controller card.
Check all cable connections. Fold cables out of the way to provide airflow for the
fan and cooling vents.
power input
connector
interface
connector
Installing Drives 10-9