Dell PRECISION 610 User Manual page 173

The configuration (.cfg)
file used by the ICU for
this card is now invalid
or does not exist. Do you
wish to load the file?
No configuration (.cfg)
file exists for the card
being modified. Do you
want to load one?
This is an EISA system.
Use an ECU, not the ICU,
to configure your system.
NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary.
FRQWLQXHG
This message appears
when you try to add a listed
card and the configuration
file for this card has been
corrupted or deleted from
the database.
This message appears
when you modify a card
and its configuration file
does not exist or has been
deleted.
This message appears if
you attempt to run the ICU
on an EISA system.
You can get a copy of the configuration
file from the original ISA Configuration
Utility Diskette that you used to create
the backup ICU diskette. Use the fol-
lowing procedure:
UDWLRQ 8WLOLW\ 'LVNHWWH
GE
LFXQG[
The name of the configuration file
is part of this card ID. For example,
if the card ID is ICU0200, the con-
figuration file is !icu0200.cfg.
To use the ICU, you must load the utility
onto a non-EISA system.
ISA Configuration Utility Messages
,6$ &RQILJX
C-5