BMW R 1200 R CLASSIC Rider's Manual page 100

ASC systems at the start of this
8
chapter.
Threaded fasteners not
96
tightened to the specified
torque can work loose or their
threads can suffer damage.
Always have the security of the
fasteners checked by a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
z
Slip spacing bushing 3 into
the wheel hub on the left-hand
side.
with BMW Motorrad Integral
OE
ABS
Take care not to damage the
ABS sensor on the left-hand
side when rolling the wheel into
position.
The front wheel must be
installed right way round to
rotate in the correct direction.
Note the direction-of-rotation ar-
rows on the tyre or the wheel
rim.
Roll the front wheel into posi-
tion between the front forks.
Raise the front wheel, insert
quick-release axle 2 and tight-
en to specified torque.
Quick-release axle in axle
holder
50 Nm
Tighten axle clamping screw 1
to the specified torque.
Clamping screw (quick-
release axle) in slider
tube
19 Nm
Remove the front-wheel stand.