Installing The Control Panel - Dell POWEREDGE EMU01 Hardware Owner's Manual

Figure 3-22. Removing and Installing the Control Panel
1
7
6
1 display module
4 control panel board cable
7 display module screws (2)

Installing the Control Panel

CAUTION:
Only trained service technicians are authorized to remove the system cover and access any of the
components inside the system. See your Product Information Guide for complete information about safety
precautions, working inside the computer, and protecting against electrostatic discharge.
1 Insert the control panel assembly display module into the chassis cutout and secure it with the two
Torx screws.
2 Affix the control panel label to the display module.
3 Install the control panel board in the system chassis and secure with the three Torx screws. See
Figure 3-22.
4 Connect the display module cable to the control panel board. See Figure 3-22.
5 Connect the control panel cable to the control panel board and secure the cable in the cable guides on
the chassis.
2
3
2 display module cable
5 control panel board screws (3) 6
3
3
Installing System Components
4
5
control panel board
display module label
81