Dell POWEREDGE EMU01 Hardware Owner's Manual page 22

Table 1-7. LCD Status Messages (continued)
Line 1 Line 2
Message Message
Shadow BIOS Fail The system BIOS failed to copy
E2013
E2014 CMOS Fail
E2015 DMA Controller
E2016 Int Controller
E2017 Timer Fail
E2018 Prog Timer
E2019 Parity Error
E201A SIO Err
E201B Kybd Controller
E201C SMI Init
E201D Shutdown Test
E201E POST Mem Test
E201F DRAC Config
E2020 CPU Config
E2021 Memory
Population
E2022 POST Fail
22
About Your System
Causes
its flash image into memory.
CMOS failure. CMOS RAM not
functioning properly.
DMA controller failure.
Interrupt controller failure.
Timer refresh failure.
Programmable interval timer
error.
Parity error.
SIO failure.
Keyboard controller failure.
System management interrupt
(SMI) initialization failure.
BIOS shutdown test failure.
BIOS POST memory test failure. See "Troubleshooting System
Dell remote access controller
(DRAC) configuration failure.
CPU configuration failure.
Incorrect memory configuration.
Memory population order
incorrect.
General failure after video.
Corrective Actions
See "Troubleshooting System
Memory" on page 106.
See "Getting Help" on page 129.
See "Getting Help" on page 129.
See "Getting Help" on page 129.
See "Getting Help" on page 129.
See "Getting Help" on page 129.
See "Getting Help" on page 129.
See "Getting Help" on page 129.
See "Getting Help" on page 129.
See "Getting Help" on page 129.
See "Getting Help" on page 129.
Memory" on page 106. If problem
persists, see "Getting Help" on
page 129.
Check screen for specific error
messages.
Ensure that the DRAC card and
cables are properly seated. See
"RAC Card" on page 56. If
problem persists, see your DRAC
documentation.
Check screen for specific error
messages.
Check screen for specific error
messages. See "Troubleshooting
System Memory" on page 106.
Check screen for specific error
messages.