Memory Information Screen; Cpu Information Screen - Dell POWEREDGE EMU01 Hardware Owner's Manual

Memory Information Screen

Table 2-4 lists the descriptions for the information fields that appear on the Memory Information
screen.
Table 2-3. Memory Information Screen
Option
System Memory Size
System Memory Type
System Memory Speed
Video Memory
System Memory Testing
Node Interleaving

CPU Information Screen

Table 2-4 lists the options and descriptions for the information fields that appear on the CPU
Information screen.
Table 2-4. CPU Information Screen
Option
64-bit
Core Speed
Bus Speed
Demand-Based Power
Management
(Disabled default)
Processor X ID
Description
Displays the amount of system memory.
Displays the type of system memory.
Displays the system memory speed.
Displays the amount of video memory.
This option determines whether system memory tests are run at
system boot. Options are Enabled and Disabled.
If this field is enabled, memory interleaving is supported if a
symmetric memory configuration is installed. If this field is set to
disabled (the default), the system can support Non-Uniform
Memory architecture (NUMA) (asymmetric) memory
configurations. See "General Memory Module Installation
Guidelines" on page 58.
Description
Specifies if the installed processor(s) support 64-bit extensions.
Displays the clock speed of the processor(s).
Displays the bus speed of the processor(s).
Enables or disables demand-based power management. When
enabled, the CPU Performance State tables will be reported to the
operating system; when disabled, the CPU Performance State
tables will not be reported to the operating system. If any of the
CPUs do not support demand-based power management, the field
will become read-only, and automatically set to Disabled.
Displays the model number of the processor. A submenu displays
the amount of level 2 cache and number of cores.
Using the System Setup Program
35