Dell POWEREDGE EMU01 Hardware Owner's Manual page 20

Table 1-7. LCD Status Messages (continued)
Line 1 Line 2
Message Message
E1422 CPU Machine Chk
E1610 PS # Missing
E1614 PS # Status
E1618 PS # Predictive
E161C PS # Input Lost
PS # Input Range Power source for specified power
E1620
E1624 PS Redundancy
E1625 PS AC Current
E1710 I/O Channel Chk
E1711 PCI PERR B## D##
F##
PCI PERR Slot #
20
About Your System
Causes
The system BIOS has reported a
machine check error.
Specified power supply is
improperly installed or removed.
Specified power supply is
improperly installed or faulty.
Power supply voltage is out of
acceptable range; specified power
supply is improperly installed or
faulty.
Power source for specified power
supply is unavailable, or out of
acceptable range.
supply is unavailable, or out of
acceptable range.
Power supply redundancy has
been lost. If the remaining power
supply fails the system will shut
down.
Power source is out of acceptable
range.
The system BIOS has reported an
I/O channel check error.
The system BIOS has reported a
PCI parity error on a component
that resides in PCI configuration
space at bus ##, device ##,
function ##.
The system BIOS has reported a
PCI parity error on a component
that resides in PCI slot #.
Corrective Actions
See "Getting Help" on page 129.
See "Troubleshooting Power
Supplies" on page 105.
See "Troubleshooting Power
Supplies" on page 105.
See "Troubleshooting Power
Supplies" on page 105.
Check the AC power source for
the specified power supply. If
problem persists, see
"Troubleshooting Power Supplies"
on page 105.
Check the AC power source for
the specified power supply. If
problem persists, see
"Troubleshooting Power Supplies"
on page 105.
See "Troubleshooting Power
Supplies" on page 105.
Check the AC power source.
See "Getting Help" on page 129.
Remove and reseat the PCI
expansion cards. If the problem
persists, see "Troubleshooting
Expansion Cards" on page 113.
If the problem persists, the
system board is faulty. See
"Getting Help" on page 129.