Removing And Replacing The Optional Front Bezel - Dell POWEREDGE EMU01 Hardware Owner's Manual

Figure 3-1. Inside the System
2
1
9
1 fan modules (4)
4 memory modules (16)
7 optional RAC
The system board holds the system's control circuitry and other electronic components. The processors
and memory modules are installed directly on the system board.
The hard-drive bays provide space for up to five optional 3.5-inch SAS hard drives. The hard drives
connect to a SAS controller card or an optional SAS RAID controller card through a SAS backplane. A
removable drive carrier supports an optional diskette drive and optional optical drive.

Removing and Replacing the Optional Front Bezel

1 Unlock the keylock at the left end of the bezel.
2 Rotate the left end of the bezel away from the front panel.
3 Unhook the right end of the bezel and pull the bezel away from the system.
4
3
8
2 SAS backplane
5 expansion cards (7)
8 optical slimline drive (optional) 9
5
6
3 heatsink/processor (4)
6 SAS controller card
optional 3.5-inch hard
drives (5)
Installing System Components
7
45