Number-Plate Carrier - BMW HP2 SPORT Rider's Manual

Number-plate carrier

Removing number-plate
carrier
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Remove the cable from hold-
ers 1 and 2.
Disconnect plug 3.
To disconnect: squeeze
the retainers at the narrow
sides of the plug together and
pull out the plug.
Protect the plug on the motor-
cycle to prevent the ingress of
foreign matter.
Remove screws 4 on left and
right and remove the number-
plate carrier.
Installing number-plate
carrier
Hold the number-plate carrier
in position, install screws 4 on
left and right and tighten to
specified torque.
Number-plate carrier to
tail section
Thread-locking compound:
Micro-encapsulated
8 Nm
9
119
z