Clutch; Shift Lever; Adjusting - BMW HP2 SPORT Rider's Manual

If you switch the ignition off
5
then on again and the ABS
light comes back on, there is a
64
fault in the ABS.

Clutch

Adjusting clutch lever
If the position of the clutch
fluid reservoir is changed,
air can enter the clutch system.
Do not twist the handlebar fitting
z
or the handlebars.
Attempting to adjust the
clutch lever while riding the
motorcycle can lead to accidents.
Do not attempt to adjust the
clutch lever unless the motor-
cycle is at a standstill.
Turn adjusting screw 1 clock-
wise.
The adjusting screw is
indexed and is easier to
turn if you push the clutch lever
forward.
Span between handlebar grip
and clutch lever increases.
Turn adjusting screw 1
counter-clockwise.
Span between handlebar grip
and clutch lever decreases.

Shift lever

Adjusting shift lever
Slacken screw 1.
Turn peg 2 to the desired pos-
ition.
You might experience dif-
ficulties with gearshifts if
the peg is set either too high or
too low. Check the setting of the
peg if you experience gearshift
difficulties.
Threaded fasteners not
tightened to the specified
torque can work loose or their
threads can suffer damage.