Mirrors - BMW HP2 SPORT Rider's Manual

Installing front left
9
flashing turn indicator
118
Work the cable into position,
insert the flashing turn indicator
and turn it through 90°.
Insert bolt 4 and in the next
step tighten it with the nut until
z
hand-tight.
Counter-hold nut 3 to facilitate
insertion of the bolt.
Connect plug 1.
Secure the cable with cable
tie 2.

Mirrors

Removing mirror
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Remove screws 1.
Remove the mirror.
Installing mirrors
Hold the mirror in position.
Install screws 1 and tighten
until hand-tight.