Turn Indicators - BMW HP2 SPORT Rider's Manual

Turn indicators

9
Removing front right
flashing turn indicator
116
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
z
Disconnect plug 1.
To disconnect: take a firm
grip of the cable close to
the front part of the plug, push it
in and then pull it forward.
Remove cable tie 2.
Counter-hold nut 3 in the next
step.
Remove screw 4.
Turn the flashing turn indicator
through 90° and remove.
Thread out the cable.
Removing front left
flashing turn indicator
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Disconnect plug 1.
To disconnect: take a firm
grip of the cable close to
the bottom part of the plug, push
it in and then pull it down.
Remove cable tie 2.
Counter-hold nut 3 in the next
step.