Middle Stand - BMW HP2 SPORT Rider's Manual

10
138
Lift the motorcycle upright,
simultaneously pressing the
lever down until the stand sup-
ports the motorcycle in the up-
z
right position.
Press the lever down to the
ground.

Middle stand

Installing middle stand
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Use the auxiliary stand with
the number (0 401 358) and
the H adapter with the number
(0 430 386).
Release left guide 1 by pulling
out pin 2 and pull the guide
out.
On the right-hand side, slip
stud 3 into mount 4 on the
motorcycle.
On the left-hand side, slip
stud 5 into mount 6 on the