Turn bulb 2 counter-clockwise
and remove it from the bulb
housing.
Replace the defective bulb.
Bulbs for flashing turn
indicators, front
LED / 12 V
Bulbs for flashing turn
indicators, rear
LED / 12 V
Turn bulb 2 clockwise to install
it in the bulb housing.
Working from the inboard side,
insert the glass into the bulb
housing and close the housing.
Install screw 1.
Replacing brake light and
rear light bulb
The LED rear light can be re-
placed only as a complete unit.
Consult a specialist workshop,
preferably an authorised BMW
Motorrad dealer.
Jump starting
The wires leading to the
power socket do not have
a load-capacity rating adequate
for jump-starting the engine. Ex-
cessively high current can lead
10
143
z