Minolta DYNAX 7 User Manual page 92

CUSTOM 26, 27
1. Varied burst
When the flash fires and exposure compensation is set, both the
flash burst and the aperture and shutter-speed change to compen-
sate the exposure.
• Exposure compensation is done for subjects both in and outside the
flash range area.
2. Fixed burst
When the flash fires and exposure compensation is set, only the
aperture/shutter-speed change to compensate the exposure. The
flash burst is fixed. Exposure within the flash range remains almost
the same.
Custom 27 - Detailed Display
1. Show all settings.
Select this setting if you want all the settings
to be shown in the display.
2. Show only the changes from the stan-
dard settings.
Use this setting when you feel that the display
is too crowded with all settings shown.
• The standard settings will not be shown, only
those that have been changed.
• The standard settings are shown on the next
page.
182
To set custom functions;
1.Open control-panel door and press the CUSTOM button.
2.Turn the front control dial to select the desired custom function.
3.Turn the rear control dial to seclect the setting.
4.Press the shutter-release button partway down to enter the setings.
Refer to pages 154-157 for additional information.
Standard settings A mode with spot
metering, and exposure
compensation
• When Custom 27-2 is selected, an exposure compensation of 0.0 will
not appear in the large icon display.
• The exposure-mode indicator and battery-condition indicator appear
all the time.
The camera's standard settings are shown in the chart below.
Item
Focus
Focus area
Metering
Exposure compensation
Flash compensation
Drive
Same plus flash is
raised and bracket-
ing selected
Standard Settings
AF-A (Autofocus priority)
Wide focus area
14 Segment honeycomb
+/- 0
+/- 0
Single frame advance
183