Minolta DYNAX 7 User Manual page 78

CUSTOM FUNCTIONS
1. Open the control-panel door
and press the CUSTOM button.
•When appears, use of the focus area selec-
tor as well as the front and rear control dials is
possible (page 156). When
can be switched.
2. Turn the front control dial to
select the desired custom func-
tion (Custom 1-35).
3. Turn the rear control dial to
select the desired setting.
154
• Custom function setting
display appears.
appears, display
4. Press the shutter-release button partway down to enter
the settings.
• When you first buy the camera, all custom functions are set to the
number 1 setting, except for Custom 33 and 35.
• This manual's explanations assume that these settings have not been
changed.
• The custom functions' settings are not affected by turning the camera
off or by removing the batteries.
Selecting the Display
• When
the single display and the 15 item dis-
play is possible using the display
selection button.
• In either display, select the desired custom function (Custom 1-35) by
using the front control dial. Select the desired setting using the rear
contol dial.
appears, switching between
155