1
screw
2
card carrier
Coin-Cell Battery
Removing the Coin-Cell Battery
CAUTION:
Information Guide
NOTICE:
periodically touching an unpainted metal surface (such as the back panel) on the computer.
NOTICE:
working inside the computer.
1 Follow the procedures in "Before You Begin" on page 105.
2 Remove the hinge cover (see page 123).
3 Remove the keyboard (see page 125).
4 Use a plastic scribe to lift the battery upward to remove it from the system board.
128
Adding and Replacing Parts
4
3
4
Before you perform the following procedures, see the safety instructions in the
.
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by
To avoid damaging the system board, you must remove the main battery before you begin
1
card
card connector
2
3
Product