Removing An Expresscard Or Blank - Dell XPS 140M Owner's Manual

The computer recognizes the ExpressCard and automatically loads the appropriate device
driver. If the configuration program tells you to load the manufacturer's drivers, use the floppy
disk or CD that came with the ExpressCard.

Removing an ExpressCard or Blank

NOTICE:
and stop it from functioning before you remove it from the computer. If you do not stop the card in the
configuration utility, you could lose data.
CAUTION:
Product Information Guide
Press the latch and remove the card or blank. For some latches, you must press the latch twice:
once to pop the latch out, and then a second time to pop the card out.
Save a blank to use when no ExpressCard is installed in a slot. Blanks protect unused slots from
dust and other particles.
68
Using ExpressCards
1
Use the ExpressCard configuration utility (click the
Before you begin any of the procedures in this section, follow the safety instructions in the
.
ExpressCard
1
icon in the taskbar) to select a card