Dell XPS 140M Owner's Manual page 102

To use PC Restore:
1 Turn on the computer.
During the boot process, a blue bar with www.dell.com appears at the top of the screen.
2 Immediately upon seeing the blue bar, press <Ctrl><F11>.
If you do not press <Ctrl><F11> in time, let the computer finish starting, and then restart
the computer again.
NOTICE:
3 On the next screen that appears, click Restore.
4 On the next screen, click Confirm.
The restore process takes approximately 6–10 minutes to complete.
5 When prompted, click Finish to reboot the computer.
NOTE:
reboot.
6 When prompted, click Yes.
The computer restarts. Because the computer is restored to its original operating state, the
screens that appear, such as the End User License Agreement, are the same ones that
appeared the first time the computer was turned on.
7 Click Next.
The System Restore screen appears and the computer restarts.
8 After the computer restarts, click OK.
Removing Dell PC Restore
NOTICE:
your computer. After you have removed Dell PC Restore, you will not be able to use it to restore your
computer's operating system.
Dell PC Restore enables you to restore your hard drive to the operating state it was in when you
purchased your computer. It is recommended that you do not remove PC Restore from your
computer, even to gain additional hard-drive space. If you remove PC Restore from the hard
drive, you cannot ever recall it, and you will never be able to use PC Restore to return your
computer's operating system to its original state.
To remove PC Restore:
1 Log on to the computer as a local administrator.
2 In Windows Explorer, go to c:\dell\utilities\DSR.
102
Solving Problems
If you do not want to proceed with PC Restore, click Reboot in the following step.
Do not manually shut down the computer. Click Finish and let the computer completely
Removing Dell PC Restore from the hard drive permanently deletes the PC Restore utility from