Prime Line Vs. Ringing Line Preference - NEC DSX Software Manual

Ringing Line Preference
Intercom (page 211)
Ringing Intercom calls
Key Ring (page 214)
(Line/Loop Keys)
Transfer (page 358)
Direct Inward Line (page 109)
Group Ring (page 189)
Extension Hunting (page 154)
(Call to UCD master)
Call Coverage Keys (page 40)
Group Call Pickup (page 184)
1
Ringing Line Preference will not answer a call ringing the Operator Call Key.
When multiple calls ring an extension simultaneously, the system services the ringing calls in the follow-
ing order:
1. INTERCOM
2. Line Key (from lowest to highest)
3. Loop Key (from lowest to highest)
In addition, if two extensions with Ringing Line Preference answer the same outside call simultaneously, the
system connects the call to the lowest numbered extension.

Prime Line vs. Ringing Line Preference

Ringing Line Preference has priority over Prime Line. For example, an extension with Ringing Line Prefer-
ence will answer a ringing line, not get dial tone on their Prime Line. In addition, a ringing Prime Line will
have priority over any other ringing line. The seize priority is as follows:
Ringing Prime Line
❥
Ringing non-Prime Line
❥
Prime Line
❥
Conditions
• None
Default Setting
• Enabled
Programming
1. To enable Ringing Line Preference for the extension:
1. In 2111-04: Ringing Line Preference (page 732), enter Yes .
296 ◆ Features
Feature
Key
Keyset
RLP = Y RLP = N
Does pressing SPEAKER while in the Headset mode
answer the ringing call?
Yes Yes
Yes No
Yes No
Yes No
Yes Yes
Yes Yes
No No
No No
Attendant
RLP = Y RLP = N
1 1
No No
Yes No
Yes No
Yes No
N/A N/A
1 1
No No
No No
No No
DSX Software Manual