Regional Defaults - NEC DSX Software Manual

Regional Defaults

Regional Defaults
Description
The system is compatible with both North American and Latin American applications.
Use the Regional Defaults capability to switch your system from the North American mode to the Latin
American mode. Switching your system to the Latin American mode makes the following changes:
The default language in programming, SMDR, and all telephone displays is Spanish. See the following
❥
for more:
- Language Selection (page 217).
- Station Message Detail Recording (page 328).
The Latin American Toll Restriction options are enabled. This is set up when you initialize each Toll
❥
Restriction Table. For more, see:
- Toll Restriction (page 351)
Conditions
• None
Default Setting
• System is enabled for North American installations.
Programming
See Description above.
Other Related Features
Features
Language Selection (page 217)
Optionally switch all telephone displays to Spanish.
Station Message Detail Recording (page 328)
Optionally enable the Spanish SMDR header and Call Type data.
Toll Restriction (page 351)
Optionally initialize each Toll Restriction Table for Latin American. Latin American Toll Restriction
is not included in this manual.
IntraMail Features
None
Operation
None
286 ◆ Features
.
Only use these options if your system is installed in Latin America.
DSX Software Manual