Programming Examples - NEC DSX Software Manual

Programming Examples

1. Forced Account Codes Require an Account Code only for 900 and 1 + 900 Long Distance Calls.
1. In 1412-04: Forced Account Codes (page 651), enter
2. In 1412-06: Account Codes for Toll Calls Only (page 651), enter
In 1551-04: Account Code Toll Restriction Level (page 668), enter
3.
Make the following entries for Toll Restriction Level 2.
4. In 3511-01: Active Key Pad (page 840), enter
In 3512-04: Allow N11 Dialing (page 842), enter
In 3512-01: Allow 0 + XXX Operator Assisted Dialing (page 841), enter
In 3512-03: Allow 101x Equal Access Dialing (page 841), enter
In 352x-1010-XXX / Local XXX (Equal Access Dialing) (page 844), make a deny table with no entries
5.
(i.e., deny nothing). This is the default setting.
6. In 353x-1+XXX / TBL-A XXX (NPA/NXX Dialing 3-Digit Table) (page 846), make a deny table and enter
900 .
7. In 354x-1+XXX-XXX / TBL-A XXXXXXX (1 + NPA + NXX Dialing 6-Digit Table) (page 848), make a
deny table with no entries (i.e., deny nothing). This is the default entry.
In 355x-XXX / TBL-B-XXX (NPA/NXX Dialing 3-Digit Table) (page 850), make a deny table and enter
8.
900 .
9. In 356x-XXX-XXX / TBL-B XXXXXX (NPA + NXX Dialing 6-Digit Table) (page 852), make a deny table
with no entries (i.e., deny nothing). This is the default setting.
10. In 2102-01: Class of Service (page 724), assign the Class of Service with Forced Account Codes enabled
to the extension.
In 2102-02: Station Toll Level (Day) (page 724) and 2102-03: Station Toll Level (Night) (page 724), be
11.
sure the extension does not use Toll Level 2. If it does, Toll Restriction will always deny 1 + 900 and 900
calls (regardless of whether the user enters an Account Code).
With this programming, an extension user can:
Press a line key or dial a code for an outside line.
1.
2. Wait for a reminder tone (3 beeps).
• With Forced Account Codes enabled, the system automatically goes into the Account Code mode after
you press a line key in step 1 above.
• If you have an Account Code Feature Key, it flashes green.
If dialing a 1 + 900 or 900 call, dial the Account Code.
3.
If dialing any other long distance call, skip this step.
4. Press #
5. Dial the outside number.
• If the user doesn't enter an Account Code for 900 or 1 + 900 calls, the system will cut off the call.
• The system will also cut off any call not allowed by the extension's Toll Restriction programming.
DSX Software Manual
(if enabled), the Account Code soft key, or an Account Code Feature Key (if programmed).
Yes .
Yes .
(for example).
2
Yes .
.
Yes
Yes
.
Yes
Account Codes
.
Features ◆ 17